Geo Tracks Fisher Price Get It Now! Saving Mudd Shoes Clearance
Saturday, December 24, 2011
Tuesday, December 20, 2011
STIHL 3003 008 6821 Rollomatic E Laminated Chain Saw Bar, 20-Inch
!±8± STIHL 3003 008 6821 Rollomatic E Laminated Chain Saw Bar, 20-Inch
Brand : STIHL | Rate : 
| Price : $52.94
Post Date : Dec 20, 2011 18:30:11 | Usually ships in 24 hours
| Price : $52.94Post Date : Dec 20, 2011 18:30:11 | Usually ships in 24 hours
STIHL 3003-008-6821 Rollomatic E laminated guide bar is 20-inches long. It is a three part (spot welded) laminated guide bar made of high grade steel with star shaped sprocket. It is an all around bar suitable for occasional, mid range, or professional users.
More Specification..!!
Thursday, December 15, 2011
Stihl MS250 in 16 inch pine
This is my father's Stihl MS250. I borrowed it to do some limbing. When I picked up up it had a round tooth chain that was not very agressive. I put it on this log and cut for about 15 seconds and made it about 1/3 of the way through. Took it back to the shop, and it was only turning 11800 RPM. Cleaning the filter got it to 13500. A new filter got it to 15800 (yikes!). Richened the high to the stops and it still was turning 14800. But it actually four strokes nicely up to about 15500 RPM where it start to smooth. It wasn't even completely smooth at 15800 RPM. I also found the the old filter did not fit well and dust was getting by. A new seemingly identical filter fit very snug so I'm guessing that with heat cycles the plastic filter warps. I put a Windsor chissel chain on it and filmed this cut. Probably 2 or 3 times faster than it was when I got it.
Promo Pocket Scanner Brand New Julie Powell Cleaving Keurig Filter Basket Free Shipping
Saturday, December 10, 2011
Remanufactured, Reconditioned And Refurbished Power Tools
What are Remanufactured Power Tools?
According to a case study from Berkeley.edu, remanufactured means that power tools are remade or rebuilt with used products to a condition as good as new. Bosch is one company that is committed to environmental awareness, including the recycle-reuse materials component. Extensive quality control at the Bosch facilities ensures that the quality of remanufactured power tool is equivalent to the quality of a new power tool. Bosch also is reusing high-grade plastic polymers from recycled power tool housings in their remanufactured power tools.
Remanufacturing processes are very similar to manufacturing processes and there is certain criteria that a power tool needs to qualify for to be remanufactured.
Specifically at the Bosch facility:
1. The power tool must fail functionally meaning, there must be a "core" - a discarded, malfunctioning, or used power tool that becomes the remanufactured power tool.
2. The technology must exist that can restore the power tool to its original shape, condition and function.
3. The power tool must be factory-built, standardized, and made with interchangeable parts.
4. The recoverable value added in the remanufactured power tool is a high percentage of the power tool's original market price.
The advantage of buying remanufactured power tools is that you keep more money in your wallet. The retailer can price these at 60% or less of the new power tool price and still make a profit. You get to purchase a high quality power tool that has a manufacturers warranty and have money leftover for lunch.
So then what's a refurbished power tool? and what's a reconditioned power tool?
According to Dictionary.com, the word "refurbished" means: To make clean, bright, or fresh again; renovate.
On the other hand, the word "reconditioned" means: To restore to good condition, especially by repairing, renovating, or rebuilding.
If a seller claims that a power tool has been "refurbished", it means it has been returned, lightly tested, cleaned, repackaged and then resold. However, "reconditioned" power tools have been thoroughly tested, repaired (if necessary), cleaned, repackaged, and resold. Reconditioned power tools are required to meet the same stringent quality-assurance standards that a "fresh" power tool from the same factory would have to achieve. In fact, most power tool manufacturers offer the same warranty for reconditioned power tools that they offer for their brand new counterparts! The main advantage to reconditioned power tools is that you save money.
One place to get professional grade reconditioned power tools is TKRecon.com. At TKRecon.com some reconditioned tools cost as much as 50% less than their brand-new brethren. Buying reconditioned or remanufactured power tools is a great way to maximize your tool budget and still purchase name-brand power tools.
But be wary if someone is advertising a "refurbished" product.
Refurbished power tools have probably not been rigorously tested and are usually just eyeballed, repackaged, and resold. Reconditioned power tools are tested and repaired in accordance with tool manufacturer standards before being resold, so they are always the better choice.
Tuesday, December 6, 2011
Friday, December 2, 2011
Poulan P3416 16-Inch 34cc 2-Cycle Gas-Powered Chain Saw
!±8± Poulan P3416 16-Inch 34cc 2-Cycle Gas-Powered Chain Saw
Brand : Poulan | Rate : | Price : $129.99
Post Date : Dec 02, 2011 09:08:56 | Usually ships in 24 hours
| Price : $129.99Post Date : Dec 02, 2011 09:08:56 | Usually ships in 24 hours
The Poulan 16-inch, 34 cc gas chain saw is perfect for light cutting jobs around the yard, with a cutting capacity of 32 inches diameter. The auto-oiling system keeps the 14-inch steel bar and chain fully lubricated. For safety, the inertia-activated chain brake stops the rotation of the chain should kickback occur. The chain saw features a primer bulb for an easy start; it also includes an anti-vibration handle for additional comfort and to reduce user fatigue. The unit comes fully assembled and includes a 1-year warranty.
More Specification..!!
Save Coffee Single Cup Brewer Diaper Dude Diaper Bag Sale Off Eagle Creek Bags Guide
Monday, November 28, 2011
Oregon Sure Sharp Chain Grinder (12 Volt)
!±8± Oregon Sure Sharp Chain Grinder (12 Volt)
Brand : Oregon | Rate : | Price :
Post Date : Nov 28, 2011 21:45:23 | Usually ships in 2-3 business days
| Price : Post Date : Nov 28, 2011 21:45:23 | Usually ships in 2-3 business days
The Sure Sharp chain grinder is an economical tool that makes hand sharpening simple. This reliable chain grinder is ruggedly built to withstand extended periods of use. Connect this grinder to any 12 volt vehicle battery and you can sharpen your saw chain right on the bar. It also comes with a power adapter, so you can plug it into a cigarette lighter socket. Features an improved shank lock feature and comes with three sharpening stones (5/32", 3/16" and 7/32").
- Longer Power Cord
- 5/32'' , 3/16'' , and 7/32'' Sharpening Stones Included
- Shank Lock for Easier Stone Replacement
- New Automobile Power Adapter
- Powerful motor runs at 17,500 RPM
Saturday, November 26, 2011
2009 STIHL TIMBERSPORTS Collegiate Challenge at the Mid-Atlantic Conclave
A clean cut down a 16-inch diameter log with an STIHL MS 460 Chain Saw, and a clean 16-inch cut back up on the same log, and the STIHL TIMBERSPORTS Collegiate Series event at the Mid-Atlantic Conclave at Allegheny College became a formality for Matt Slingerland.
Tuesday, November 22, 2011
How to Clean a Carburetor
The carburetor is a part of the engine that allows it to do the job it is intended to do. It carefully mixes the right amount of air and fuel to allow combustion and produce power. Without this device, the engines would not work. During the 1980s this device was replaced by the automatic fuel injector. However, the carburetor is still very common in some high-performance vehicles, as well as motorcycles and many other small engines.
Maintenance Steps
It is very important to keep the carburetor clean for it to run properly. If the carburetor is not periodically cleaned and maintained, its ability to regulate the combustion can seriously be compromised, resulting in the motor to not run properly.
The first step in keeping your carburetor running properly is to remove it from your motor. After you have done so you will be able to clean it, disassemble it, and keep it in running condition.
How to Clean
After you remove the carburetor from the motor, cleaning it in a cleaning solvent would be the first thing you should do. You can do this by using a special tool designed for cleaning carburetors. After you have cleaned the carburetor with the cleaning solvent, as well as finished disassembling it, you must then make sure that all ports and jets are cleared. You can accomplish this by flushing out these parts with compressed air.
It is very important that you use proper care when cleaning out the carburetor. If you intend to do this, make sure that you use the proper equipment necessary perform this function. Do not use wires, or other machine-powered products to clean the carburetor. This is because the carburetor is carefully calibrated to a specific setting. Using those products might damage the product.
Sunday, November 20, 2011
Poulan Pro PP4218AVX 18-Inch 42cc 2-Cycle Gas-Powered Anti-Vibration Chain Saw with Case
!±8± Poulan Pro PP4218AVX 18-Inch 42cc 2-Cycle Gas-Powered Anti-Vibration Chain Saw with Case
Brand : Poulan | Rate : | Price : $149.00
Post Date : Nov 20, 2011 16:21:30 | Usually ships in 24 hours
| Price : $149.00Post Date : Nov 20, 2011 16:21:30 | Usually ships in 24 hours
The Poulan Pro 18-inch 42 cc 2-cycle gas anti-vibration chainsaw features a 18-inch bar. Its anti-vibration system isolates the engine from the chassis, reducing vibration and improving comfort and safety; further safety measures are ensured by the inertia-activated chain brake, which stops rotation of the chain should kickback occur. The auto oiling system lubricates the bar and chain continually during use. The saw also features: durachrome vertical cylinder design; an improved pulley starting system; a reverse sprocket for easier chain replacement; a super clean air filtration system, and a soft touch handle. The included case keeps the saw neat and clean. This unit come fully assembled and includes a 1-year warranty.
More Specification..!!
Saturday, November 12, 2011
Stihl Chainsaw Prices - The Truth About Stihl Chainsaw Prices
Price is a big consideration when purchasing a chainsaw especially for a first time or part-time user. Stihl chainsaw prices may scare a few non-professionals off but that's only because they are looking at the wrong models. One of the biggest mistakes newcomers make is to head for the heavy duty section and look at the biggest and most powerful machines on the market. Why? If you are intending to use it spasmodically then why not consider heading to the other end of the spectrum and looking at the smaller machines.
For use around the home, the smaller machines are extremely effective in fact, don't let size put you off. For example, Stihl's new MS 192 C-E model is ideal for the work-at-homer. It features the advanced easy-to-start system and is comfortable for just about anyone to operate.
Comparing Stihl chainsaw prices - at around 0, the MS 192 is ideally priced for someone not really hell bent on making a living with a chainsaw. Compare 0 to over 00 for the top of the line models and you can quickly get a guage on the difference between between the lightweight and heavyweight models.
Stihl Electric Chainsaws
One of the best pieces of advice a newcomer can get is to compare the electric chainsaws against the noisier, more expensive gas-powered models. The ideal situation is have have both electric and gas-powered but consider how much use you are going to put your new saw to and you may find an electric model under 0 may just be the ticket.
Don't worry though, while these electric models may be priced low, they have the necessary capability to perform well on minor jobs around the house. If you're comparing Stihl chainsaw prices, then buying a Stihl electric is stepping up a level again. While you'll be parting with anything up to four times the price you would for an electric saw at one of the main department stores, the Stihl models such as the MSE 220 are loaded with extra features.
What you need to decide is it could be more cost effective to purchase a good gas-powered model for the price you would outlay to buy the top electric model on the market.
Trumpers Skin Food Best Cloth Diapers Kissaluvs Top Quality Global Travel Boise This Instant
Wednesday, November 9, 2011
Repair of Stihl MS250 Chainsaw Part 2 of 4
Replacing the Fuel and Impulse lines and continuing the reassembly. Visit my channel for more repair videos; www.youtube.com
Subscribe to:
Posts (Atom)
|
|
|
|
 |
 |
 |
 |
 |
 |
 |
 |