Geo Tracks Fisher Price Get It Now! Saving Mudd Shoes Clearance
Saturday, December 24, 2011
Tuesday, December 20, 2011
STIHL 3003 008 6821 Rollomatic E Laminated Chain Saw Bar, 20-Inch
!±8± STIHL 3003 008 6821 Rollomatic E Laminated Chain Saw Bar, 20-Inch
Brand : STIHL | Rate : 
| Price : $52.94
Post Date : Dec 20, 2011 18:30:11 | Usually ships in 24 hours
| Price : $52.94Post Date : Dec 20, 2011 18:30:11 | Usually ships in 24 hours
STIHL 3003-008-6821 Rollomatic E laminated guide bar is 20-inches long. It is a three part (spot welded) laminated guide bar made of high grade steel with star shaped sprocket. It is an all around bar suitable for occasional, mid range, or professional users.
More Specification..!!
Thursday, December 15, 2011
Stihl MS250 in 16 inch pine
This is my father's Stihl MS250. I borrowed it to do some limbing. When I picked up up it had a round tooth chain that was not very agressive. I put it on this log and cut for about 15 seconds and made it about 1/3 of the way through. Took it back to the shop, and it was only turning 11800 RPM. Cleaning the filter got it to 13500. A new filter got it to 15800 (yikes!). Richened the high to the stops and it still was turning 14800. But it actually four strokes nicely up to about 15500 RPM where it start to smooth. It wasn't even completely smooth at 15800 RPM. I also found the the old filter did not fit well and dust was getting by. A new seemingly identical filter fit very snug so I'm guessing that with heat cycles the plastic filter warps. I put a Windsor chissel chain on it and filmed this cut. Probably 2 or 3 times faster than it was when I got it.
Promo Pocket Scanner Brand New Julie Powell Cleaving Keurig Filter Basket Free Shipping
Saturday, December 10, 2011
Remanufactured, Reconditioned And Refurbished Power Tools
What are Remanufactured Power Tools?
According to a case study from Berkeley.edu, remanufactured means that power tools are remade or rebuilt with used products to a condition as good as new. Bosch is one company that is committed to environmental awareness, including the recycle-reuse materials component. Extensive quality control at the Bosch facilities ensures that the quality of remanufactured power tool is equivalent to the quality of a new power tool. Bosch also is reusing high-grade plastic polymers from recycled power tool housings in their remanufactured power tools.
Remanufacturing processes are very similar to manufacturing processes and there is certain criteria that a power tool needs to qualify for to be remanufactured.
Specifically at the Bosch facility:
1. The power tool must fail functionally meaning, there must be a "core" - a discarded, malfunctioning, or used power tool that becomes the remanufactured power tool.
2. The technology must exist that can restore the power tool to its original shape, condition and function.
3. The power tool must be factory-built, standardized, and made with interchangeable parts.
4. The recoverable value added in the remanufactured power tool is a high percentage of the power tool's original market price.
The advantage of buying remanufactured power tools is that you keep more money in your wallet. The retailer can price these at 60% or less of the new power tool price and still make a profit. You get to purchase a high quality power tool that has a manufacturers warranty and have money leftover for lunch.
So then what's a refurbished power tool? and what's a reconditioned power tool?
According to Dictionary.com, the word "refurbished" means: To make clean, bright, or fresh again; renovate.
On the other hand, the word "reconditioned" means: To restore to good condition, especially by repairing, renovating, or rebuilding.
If a seller claims that a power tool has been "refurbished", it means it has been returned, lightly tested, cleaned, repackaged and then resold. However, "reconditioned" power tools have been thoroughly tested, repaired (if necessary), cleaned, repackaged, and resold. Reconditioned power tools are required to meet the same stringent quality-assurance standards that a "fresh" power tool from the same factory would have to achieve. In fact, most power tool manufacturers offer the same warranty for reconditioned power tools that they offer for their brand new counterparts! The main advantage to reconditioned power tools is that you save money.
One place to get professional grade reconditioned power tools is TKRecon.com. At TKRecon.com some reconditioned tools cost as much as 50% less than their brand-new brethren. Buying reconditioned or remanufactured power tools is a great way to maximize your tool budget and still purchase name-brand power tools.
But be wary if someone is advertising a "refurbished" product.
Refurbished power tools have probably not been rigorously tested and are usually just eyeballed, repackaged, and resold. Reconditioned power tools are tested and repaired in accordance with tool manufacturer standards before being resold, so they are always the better choice.
Tuesday, December 6, 2011
Friday, December 2, 2011
Poulan P3416 16-Inch 34cc 2-Cycle Gas-Powered Chain Saw
!±8± Poulan P3416 16-Inch 34cc 2-Cycle Gas-Powered Chain Saw
Brand : Poulan | Rate : | Price : $129.99
Post Date : Dec 02, 2011 09:08:56 | Usually ships in 24 hours
| Price : $129.99Post Date : Dec 02, 2011 09:08:56 | Usually ships in 24 hours
The Poulan 16-inch, 34 cc gas chain saw is perfect for light cutting jobs around the yard, with a cutting capacity of 32 inches diameter. The auto-oiling system keeps the 14-inch steel bar and chain fully lubricated. For safety, the inertia-activated chain brake stops the rotation of the chain should kickback occur. The chain saw features a primer bulb for an easy start; it also includes an anti-vibration handle for additional comfort and to reduce user fatigue. The unit comes fully assembled and includes a 1-year warranty.
More Specification..!!
Save Coffee Single Cup Brewer Diaper Dude Diaper Bag Sale Off Eagle Creek Bags Guide
Subscribe to:
Posts (Atom)
|
|
|
|
 |
 |
 |
 |
 |
 |
 |
 |